DOMINO, beech range DS 4/5/6/8/10 1060 BU

for DF 500

Item number 576794

Items included

- DOMINO tenon assortment 4 x 20 mm (450 pieces), 5 x 30 mm (225 pieces), 6 x 40 mm (150 pieces), 8 x 40 mm (100 pieces), 8 x 50 mm (75 pieces), 10 x 50 mm (60 pieces)
- DOMINO router for sizes 4, 5, 6, 8 and 10
- Systainer SYS3 M 187

Show details

DOMINO tenon assortment 4 x 20 mm (450 pieces), 5 x 30 mm (225 pieces), 6 x 40 mm (150 pieces), 8 x 40 mm (100 pieces), 8 x 50 mm (75 pieces), 10 x 50 mm (60 pieces)
DOMINO router for sizes 4, 5, 6, 8 and 10
Systainer³

SYS3 M 187

Close

Steady. Steadier. DOMINO.

The special shape in combination with expanding glue pockets and longitudinal grooves gives the dowels a secure grip. For absolutely twist-proof connections and maximum stability. Added to this is significantly faster processing: The first dowel hole is aligned with extreme ease and routed accurately using flip stops. It immediately secures the workpieces that are to be joined so that they are exact and flush with the edge. The DOMINO system even tolerates smaller imprecisions in the other dowel holes.

All DOMINO dowels quickly at hand due to tidy storage in the Systainer
Get started immediately, as the required routers are included in the set
The cross cut of a DOMINO dowel corresponds to that of three round dowels of the same drill diameter, meaning that it is extremely steady in comparison
The laterally projecting guide ribs centre the dowel in the middle of the DOMINO milling groove and thus ensure perfect alignment of workpieces
Specially formed glue pockets and longitudinal grooves distribute the glue evenly, for optimal joining
Excessive glue can escape through the lateral longitudinal grooves
100% rotation-proof right from the first DOMINO
Quick finding of the right dowel through imprinted size specifications
all DOMINO dowels quickly at hand and cleanly packed in the Systainer³

Product details

DS 4/5/6/8/10 1060 BU

Not flat. Not round. DOMINO!

DOMINOs combine all the advantages of round and flat dowels. Thanks to their unique shape, they are extremely stable and secured against rotation right from the first dowel.
For inside and out

DOMINOs are available in two materials: Beech for interior applications and weatherproof, insect- and mould-resistant sipo DOMINOs for outdoor applications.
100% rotation-proof

Right from ,the first DOMINO the joints are completely secured against rotation – without aligning the workpieces.
Overview of dowel sizes

The right dowel for every application: With different sizes from 4 x 20 mm up to 14 x 140 mm and individually adjustable rods.

The right dowel for every DOMINO machine

With the DOMINO DF 500 joining machine, you use dowels from 4 x 20 mm to 10 x 50 mm in size. For the DOMINO XL DF 700, you can use dowels from 8 x 40 mm up to 14 x 140 mm in size and the corner and flat connectors.
Maximum stability

The special shape of the DOMINO in combination with expanding glue pockets and lateral longitudinal grooves gives the dowels a secure grip.
A perfect fit

The DOMINO DF 500 jointers precisely adjust the holes to the respective dowels. The special grooving geometry of the dowels enables accuracy and a perfect fit.
Environmentally friendly

All DOMINOs originate from sustainable forest management. The beech dowels are certified by the Pan European Forest Council (PEFC).
Now extremely flexible, too

The new DOMINO corner and flat connectors: Connect even quicker and release it again as necessary.

Not flat. Not round. DOMINO!

DOMINOs combine all the advantages of round and flat dowels. Thanks to their unique shape, they are extremely stable and secured against rotation right from the first dowel.

For inside and out

DOMINOs are available in two materials: Beech for interior applications and weatherproof, insect- and mould-resistant sipo DOMINOs for outdoor applications.
100% rotation-proof

Right from ,the first DOMINO the joints are completely secured against rotation – without aligning the workpieces.
Overview of dowel sizes

The right dowel for every application: With different sizes from 4 x 20 mm up to 14 x 140 mm and individually adjustable rods.
The right dowel for every DOMINO machine

With the DOMINO DF 500 joining machine, you use dowels from 4 x 20 mm to 10 x 50 mm in size. For the DOMINO XL DF 700, you can use dowels from 8 x 40 mm up to 14 x 140 mm in size and the corner and flat connectors.
Maximum stability

The special shape of the DOMINO in combination with expanding glue pockets and lateral longitudinal grooves gives the dowels a secure grip.
A perfect fit

The DOMINO DF 500 jointers precisely adjust the holes to the respective dowels. The special grooving geometry of the dowels enables accuracy and a perfect fit.
Environmentally friendly

All DOMINOs originate from sustainable forest management. The beech dowels are certified by the Pan European Forest Council (PEFC).
Now extremely flexible, too

The new DOMINO corner and flat connectors: Connect even quicker and release it again as necessary.