Hole drilling set LR 32-SYS

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400 in the FS-LR 32 hole drilling system

Item number 576799

Items included

- guide plate
- centring mandrel
- hinge location cutter HM Ø 35 mm
- dowel drill HW Ø 5 mm (V-shaped tip)
- dowel drill HM Ø 5 mm (with centring bit and pre-cutter)
- 2 parallel side fences with adjustable stop
- FSZ 120 fastening clamps (two units)
- Longitudinal stop
- screwdriver, WAF 5
- Systainer SYS3 M 112

Show details

Functions

Holes in series.

Hole series are always drilled with a spacing of 32 mm and a hole diameter of 5 mm or 3 mm. The hole series drilling system is a complete set for fast and simple production of series of holes for shelf supports, rear wall supports and fittings with the OF 1010 or OF 1400 router. Everything in a single Systainer.

Everything that you need for a series of holes at hand in one Systainer
With the LR 32 system – comprising the guide rail FS 1400/2-LR 32 or FS 2424/2-LR 32 and the hole drilling system – precise rows of holes spaced 32 mm apart can be drilled with the Festool router
The LR 32 guide rail is aligned quickly and parallel to the two side stops, which are positioned by means of an adjustable stop at the workpiece and guide rail
The guide rail is precisely positioned with 9, 5, 16 or 32 mm edge clearance over the stopper in the longitudinal direction
Centring mandrel for perfect centring of the router on the guide plate
Spring-loaded positioning rocker for effective operation when drilling the hole series
Perfectly guided through fine adjustment of the guide play and additional handle on the guide plate
Properly secured thanks to the supplied guide rail clamps
The most important hinge location cutters are already included in the set
for use with hole line guide rails

Product highlights

Achieve ideal results more quickly:

Highly efficient production of series of holes with 32 mm spacing.
Convenient and safe:

Everything together, everything well organised, everything is close to hand in the Systainer – the complete set incl. dowel drill with 5 mm diameter and fastening clamps.
Systems get it done:

Compatible with and can be connected to all Systainer generations, mobile dust extractors and many other system accessories.

Product details

LR 32-SYS

Everything included

Everything in one Systainer: Guide plate, centring mandrel, operating tool, HW hinge location cutter with 35 mm diameter, HW dowel drill with 5 mm diameter (V-shaped tip), HW dowel drill with 5 mm diameter (with centre point and pre-cutter), two parallel side fences with adjustable stop, fastening clamp and two longitudinal stops.
Customised vehicle integration

Thanks to the special holder, Systainer³ can be directly integrated into bott vario3 vehicle equipment.
Ergonomic transportation

The front carrying handle allows for ergonomic carrying close to the body.
Open, close, connect with a single turn

All Systainer³ can be connected to one another and to other generations. The content is accessible at all times, without having to disconnect them first.

A tidy storage system

Systainer³ units can be connected to many other system accessories, e.g. mobile dust extractors.
All-round protection

Everything is effectively protected against dust, spray water or changes in temperature in the Systainer³.
Content security

Thanks to the integrated latch, the content of the Systainer³ can be locked securely.

Everything included

Everything in one Systainer: Guide plate, centring mandrel, operating tool, HW hinge location cutter with 35 mm diameter, HW dowel drill with 5 mm diameter (V-shaped tip), HW dowel drill with 5 mm diameter (with centre point and pre-cutter), two parallel side fences with adjustable stop, fastening clamp and two longitudinal stops.

Customised vehicle integration

Thanks to the special holder, Systainer³ can be directly integrated into bott vario3 vehicle equipment.
Ergonomic transportation

The front carrying handle allows for ergonomic carrying close to the body.
Open, close, connect with a single turn

All Systainer³ can be connected to one another and to other generations. The content is accessible at all times, without having to disconnect them first.
A tidy storage system

Systainer³ units can be connected to many other system accessories, e.g. mobile dust extractors.
All-round protection

Everything is effectively protected against dust, spray water or changes in temperature in the Systainer³.
Content security

Thanks to the integrated latch, the content of the Systainer³ can be locked securely.

Usage

Main applications

Preparing holes series with 32 mm spacing
Drilling of fittings like cupboard hinges

Technical Data

Technical data

Hole spacing

32.00 mm

Length of series of holes (without guide extension)

1400 / 2424

Side stop setting range

0 - 110 mm

Downloads

Accessories

You can view 8 of 8 possible accessory items here. You can view 4 of 8 possible accessory items here.

Guide rail FS 1400/2-LR 32

for portable circular saws, routers with adapter, jigsaws with adapter, DSC-AG 125, DSC-AG 230
Guide rail FS 2424/2-LR 32

for portable circular saws, routers with adapter, jigsaws with adapter
Guide plate FP-LR 32

for routers OF 900, OF 1000, OF 1010, OF 1400 in the FS-LR32 hole drilling system
Parallel side fence SA-LR 32

for routers OF 900, OF 1000, OF 1010, OF 1400 in the FS-LR32 hole drilling system
Stopper LA-LR 32 FS

for routers OF 900, OF 1000, OF 1010, OF 1400 in the FS-LR32 hole drilling system
Dowel drill HW S8 D5/30 Z

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400
Through-hole drill HW S8 D5/30

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200
Hinge location cutter HW S8 D35

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200