Surface preparation

To Products
Category
Abrasives
Manual abrasive
Sanding blocks
Pads and sanding pad
Machine accessories
Cordless accessories
Diamond grinding system
Wallpaper perforator
 Filter
Tool
  • Abrasives Systainer³
  • GRANAT starter set
  • Granat D150
  • Granat D225
  • Granat D225 soft
  • Granat D125
  • Granat 80x133
  • Granat D90
  • Granat V93
  • Granat 100x150 (DELTA/9)
  • Granat D77
  • Granat 93x178
  • Granat 115x228
  • Granat 80x400
  • Granat Net D150
  • Granat Net D225
  • Granat Net D125
  • Granat Net 80x133
  • Granat Net 100x150
  • Rubin 2 D150
  • Rubin 2 D125
  • Rubin 2 100x150
  • Rubin 2 V93
  • Rubin 2 D90
  • Rubin 2 80x133
  • Rubin 2 abrasive belt L620x105
  • Rubin 2 abrasive belt L533x75
  • Saphir D150
  • Saphir D225
  • Saphir D125
  • Platin D150
  • Platin D125
  • Platin D90
  • Vlies D150
  • Vlies D125
  • Hand abrasive Granat abrasive roll 115 mm x 25 m
  • Manual abrasive Granat Soft abrasive roll (pre-perforated) 115 mm x 25 m
  • Hand abrasive Granat sandpaper 230 x 280 mm
  • Manual abrasive Granat sandpaper 46 x 178 mm
  • Hand-sanding block 69x98x26 36 GR/6 Granat

    for manual abrasives

  • Hand-sanding block 69x98x26 60 GR/6 Granat

    for manual abrasives

  • Hand-sanding block 69x98x26 120 GR/6 Granat

    for manual abrasives

  • Hand-sanding block 69x98x26 220 GR/6 Granat

    for manual abrasives

  • Hand-sanding block 69x98x26 120 CO GR/6 Granat

    for manual abrasives

  • Hand abrasive sponge 98x120x13 60 GR/6 Granat

    for manual abrasives

  • Hand abrasive sponge 98x120x13 120 GR/6 Granat

    for manual abrasives

  • Hand abrasive sponge 98x120x13 220 GR/6 Granat

    for manual abrasives

  • Hand abrasive sponge 98x120x13 800 GR/6 Granat

    for manual abrasives

  • Sanding block HSK-D 150 W
  • Sanding block HSK-D 150 H
  • Sanding block HSK 80x133 H
  • Hand-sanding block HSK-STF-46x178
  • Sanding block HSK-A 80x130
  • Sanding block HSK-A 115x226
  • Sanding block HSK-A 80x400
  • Sanding block HSK-A 80x200
  • Sanding block HSK-A-Set
  • Sanding pad ST-STF D150/MJ2-FX-W-HT

    for RO 150 FEQ

  • Sanding pad ST-STF D150/MJ2-FX-SW

    for RO 150 FEQ

  • Sanding pad ST-STF D150/MJ2-FX-H-HT

    for RO 150 FEQ

  • Sanding pad ST-STF D150/MJ2-M8-W-HT FUSION-TEC

    for ETS 150, ETS EC 150, LEX 150 and WTS 150/7

  • Sanding pad ST-STF D150/MJ2-M8-SW FUSION-TEC

    for ETS 150, ETS EC 150, LEX 150 and WTS 150/7

  • Sanding pad ST-STF D150/MJ2-M8-H-HT FUSION-TEC

    for ETS 150, ETS EC 150, LEX 150 and WTS 150/7

  • Sanding pad ST-STF D150/17 MJ 5/16"

    for external machines

  • Sanding pad ST-STF D125/8 FX-W-HT

    for RO 125 FEQ

  • Sanding pad ST-STF D125/8 FX-SW

    for RO 125 FEQ

  • Sanding pad ST-STF D125/8 FX-H-HT

    for RO 125 FEQ

  • Sanding pad ST-STF 125/8-M4-J W-HT

    for ES 125, ETS 125, ETSC 125

  • Sanding pad ST-STF 125/8-M4-J SW

    for ES 125, ETS 125, ETSC 125

  • Sanding pad ST-STF 125/8-M8-J H

    for ETS EC 125, LEX 125

  • Sanding pad ST-STF 125/8-M8-J W-HT

    for ETS EC 125, LEX 125

  • Sanding pad ST-STF 125/8-M8-J SW

    for ETS EC 125, LEX 125

  • Sanding pad ST-STF-D215/8-LHS 225-SW

    for PLANEX, PLANEX easy long-reach sanders

  • Sanding pad ST-D220/48-LHS 2 225

    for PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225 EQ long-reach sanders

  • Sanding pad ST-STF-D215/8-IP-LHS 225

    for long-reach sander PLANEX

  • Sanding pad ST-STF D90/7 FX H-HT

    for RO 90 DX

  • Sanding pad ST-STF D90/7 FX W-HT

    for RO 90 DX

  • Sanding pad ST-STF-D77/6-M5 W

    for LEX 3 77

  • Sanding pad ST-STF-D115/0-M14 H

    for RAS 115

  • Sanding pad ST-STF-D115/0-M14 W

    for RAS 115

  • Sanding pad ST-D115/0-M14/2F

    for RAS 115

  • Sanding pad ST-STF-D180/0-M14 W

    for RAS 180

  • Sanding pad ST-D180/0-M14/2F

    for RAS 180

  • Sanding pad ST-STF-D185/16-M8 W

    for LEX 185

  • Sanding pad ST-STF-D185/16-M8 SW

    for LEX 185

  • Sanding pad LSS-STF-RO90 V93 E

    for LSS-STF-RO90 V93/6

  • Sanding pad SSH-STF-80x130/8

    for RS 4

  • Sanding pad SSH-STF-80x130/12

    for RTS 400, RS 400, RTSC 400

  • Sanding pad SSH-GE-STF-RO90 DX

    suitable for abrasive V93

  • Sanding pad LSS-STF-RO90 V93/6

    suitable for abrasive V93

  • Sanding pad SSH-STF-V93/6-W/2

    for DX 93, RO 90 DX

  • Sanding pad SSH-STF-V93/6-H/2

    for DX 93, RO 90 DX

  • Sanding pad SSH-STF-93x175/8

    for RS 300, RS 3, LRS 93

  • Flat sanding pad SSH-STF-LS130-F

    for LS 130

  • Rebate profile sanding pad SSH-STF-LS130-90 GR

    for LS 130

  • Radius profile sanding pad SSH-STF-LS130-R6KV

    for LS 130

  • Radius profile sanding pad SSH-STF-LS130-R18KV

    for LS 130

  • Radius profile sanding pad SSH-STF-LS130-R25KV

    for LS 130

  • V-groove profile sanding pad SSH-STF-LS130-V10

    for LS 130

  • Flute profile sanding pad SSH-STF-LS130-R15KX

    for LS 130

  • DIY construction kit SSH-STF-LS130 Kit

    for LS 130

  • Radius profile sanding pad SSH-STF-LS130-R10KV

    for LS 130

  • Flute profile sanding pad SSH-STF-LS130-R5KX

    for LS 130

  • Flat sanding pad SSH-STF-LS130-LL195

    for LS 130

  • Sanding pad SSH-STF-115x225/10

    for RS 200, RS 2, RS 100, RS 1

  • Sanding pad SSH-STF-115x221/10 RS 1 C

    for RS 100 C, RS 1 C

  • Sanding pad SSH-115x225/10

    for RS 200, RS 2, RS 100, RS 1

  • Sanding pad SSH-93x175/8

    for RS 300, RS 3, LRS 93

  • Sanding pad SSH-STF-80x400/17

    for LRS 400, HSK 80 x 400, HSK 80 x 200

  • Sanding pad SSH-STF DELTA/9

    for DTS 400, DTSC 400, DS 400

  • Iron sanding pad SSH-STF-V93x266/14

    for RS 300, RS 3, LRS 93

  • Flat sanding pad SSH-STF-V93L/6

    for DX 93

  • Interface pad IP-STF D150/MJ2-5/2

    for eccentric sander with diameter of 150 mm

  • Interface pad IP-STF D150/MJ2-15/1

    for eccentric sander with diameter of 150 mm

  • Interface pad IP-D220-LHS 2 225-SW

    for PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225 EQ long-reach sanders

  • Interface pad IP-STF-D220/48-LHS 2 225

    for PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225 EQ long-reach sanders

  • Interface pad IP-STF-D215/8/2x

    for the PLANEX 225 EQ long-reach sander

  • Interface pad IP-STF-80x133/12-STF LS130/2

    for LS 130

  • Interface pad IP-STF-D120/8-J

    for ES 125, ETS 125, ETSC 125, ETS EC 125, RO 125, LEX 125

  • Interface pad IP-STF-D90/6

    for RO 90 DX

  • Interface pad IP-STF-D77/6

    for LEX 3 77

  • Protection pad PP-STF D150/2

    for RO 150, ES 150, ETS 150, ETS EC 150, LEX 150, WTS 150

  • Protection pad PP-STF D125/2

    for RO 125, ES 125, ETS 125, ETSC 125, ES-ETS 125, ES-ETSC 125, ETS EC 125, LEX 125

  • Protection pad PP-STF 80x133/2

    for RTS 400, RTSC 400, RS 400, RS 4, LS 130

  • Protection pad PP-STF DELTA/9/2

    for DTS 400, DTSC 400, DS 400

  • Chip collection bag SB-Longlife ETSC 2

    for ETSC 2 125 and ETSC 2 150

    Available from February
  • Chip collection bag SB-Longlife RTS/DTS/ETS

    for RTS 400, RTSC 400, DTS 400, DTSC 400, ETS 125, ETSC 125

  • Dust bag AS-BS 75/105

    for BS 75, BS 105

  • Turbo filter bag TF-RS 1/5

    for RS 100, RS 1

  • Turbo filter bag TF II-RS/ES/ET/5

    for RS 300, RS 3, RS 200, RS 2, ES 150, ETS 150, ET 2

  • Turbo filter bag set TFS II-ET/RS

    for RS 300, RS 3, RS 200, RS 2, ET2

  • Turbo filter bag TF II-RS/ES/ET/25

    for RS 300, RS 3, RS 200, RS 2, ES 150, ETS 150, ET 2

  • Turbo filter bag TF-RS 400/25

    for RS 400, RTS 400, DS 400, DTS 400, ES 125, ETS 125

  • Turbo filter bag TF-RS 400/5

    for RS 400, RTS 400, DS 400, DTS 400, ES 125, ETS 125

  • Turbo filter bag set TFS-RS 400

    for RS 400, RTS 400, DS 400, DTS 400, ES 125, ETS 125

  • Turbo filter bag set TFS-ES 150

    for ES 150, ETS 150

  • Protector FESTOOL 150FX

    for RO 150 FEQ

  • Protector FESTOOL 125FX

    for RO 125 FEQ

  • Protector FESTOOL 90FX

    for RO 90 DX

  • Protector PR DTS-R 100x150

    for DTS 400 REQ, DTSC 400

  • Protector PR RTS-R 80x133

    for RTS 400 REQ, RTSC 400

  • Protector PR ETS-R 125

    for ETS 125 REQ, ETSC 125

  • Protector PR ETSC 2 125

    for ETSC 2 125

    Available from February
  • Protector PR ETSC 2 150

    for ETSC 2 150

    Available from February
  • Transport bag LHS-E 225-BAG

    for the PLANEX easy LHS-E 225 EQ long-reach sander

  • Transport bag LHS 2-M 225-BAG

    for PLANEX LHS 2-M 225 EQ long-reach sanders

  • Systainer³ SYS-STF-D225

    for long-reach sander PLANEX LHS 2 225 EQ(I)

  • Brush segment BS-LHS 225

    for long-reach sander PLANEX

  • Brush strip BE-LHS 225

    for long-reach sander PLANEX

  • Guide extension VL-LHS 225

    for long-reach sander PLANEX

  • Auxiliary handle ZG-LHS 225

    for long-reach sander PLANEX LHS 2 225 EQ(I)

  • Guide extension VL-LHS 2 225

    for long-reach sander PLANEX LHS 2 225 EQ(I)

  • Brush segment BS-LHS-E 225

    for the PLANEX easy LHS-E 225 EQ long-reach sander

  • Brush strip BE-LHS-E 225

    for the PLANEX easy LHS-E 225 EQ long-reach sander

  • Hose clip SC-LHS 2 225

    for PLANEX LHS 2 225 EQ(I) and PLANEX LHS 2-M 225 EQ long-reach sanders

  • Carrying harness TG-LHS 225

    for the following long-reach sanders: PLANEX LHS 2 225 EQ(I), PLANEX LHS 2-M 225 EQ, PLANEX 225 EQ and PLANEX LHS-E 225 easy

  • Auxiliary handle ZG-RAS/RO

    for RO 150, RAS, WTS 150, RAP 150

  • Handle BG-RO 150

    for RO 150 FEQ

  • Positioning aid AH-ES-ETS/ETSC

    for ETS 125 REQ, ETSC 125, ES-ETS 125 and ES-ETSC 125

  • Base runner LAS-H-ES

    for AH-ES-ETS/ETSC, ES-ETSC and ES-ETS

  • Base runner LAS-W-ES

    for AH-ES-ETS/ETSC, ES-ETSC and ES-ETS

  • Bench unit SE-BS 75/105

    for BS 75, BS 105

  • Sanding base SU/GG-BS 75

    for BS 75

  • Sanding base SU/KM-BS 75

    for BS 75

  • Sanding base SU/GG-BS 105

    for BS 105

  • Sanding base SU/KM-BS 105

    for BS 105

  • Plate TP-STF-DX93

    for DX 93

  • Conversion kit TP-STF-V93-W

    for DX 93

  • Slideway lining GB-LAS-STF-ES/5

    for AH-ES-ETS/ETSC, LAS-W-ES, ES-ETSC and ES-ETS

  • Suction hose D 21,5 x 5m HSK

    for hand-sanding block

  • Rustilon brushes LD 85

    for BMS 180

  • Rustilon brushes BG 80

    for BMS 180

  • Rustilon brushes KB 85

    for BMS 180

  • Sanding frame FSR-BS 105

    for BS 105

  • Sanding frame FSR-BS 75

    for BS 75

  • IAS hose IAS 3-3500 AS

    for LEX 3, LEX 2, LRS

  • IAS hose IAS 3-5000 AS

    for LEX 3, LEX 2, LRS

  • IAS hose IAS 3-7000 AS

    for LEX 3, LEX 2, LRS

  • IAS hose IAS 3 light 5000 AS

    for LEX 3, LEX 2, LRS

  • IAS adapter IAS 3-SD

    for LEX 3, LEX 2, LRS

  • IAS hose IAS 3 light 3500 AS

    for LEX 3, LEX 2, LRS

  • IAS hose IAS 3 light 7000 AS

    for LEX 3, LEX 2, LRS

  • IAS hose IAS 3 light 10000 AS

    for LEX 3, LEX 2, LRS

  • Ear protection GHS 25 I
  • Extraction adapter AA-BS 75/105

    for BS 75, BS 105

  • Cleaning and lubricating oil LFC 9022/50

    for LEX, LRS

  • Denibber LZK-HM
  • Battery pack BP 18 Li 3,0 Ergo I

    for ETSC 125, RTSC 400, DTSC 400 cordless sanders

  • Rapid charger TCL 6

    for all battery packs in voltage classes 10.8 V to 18 V (with the exception of: BP-XS battery pack for CXS/TXS and MXC charger)

  • Rapid charger TCL 6 DUO

    for all battery packs in voltage classes 10.8 V to 18 V (with the exception of: BP-XS battery pack for CXS/TXS and MXC charger)

  • Rapid charger SCA 16

    for all battery packs in voltage classes 10.8 V to 18 V (with the exception of: BP-XS battery pack for CXS/TXS and MXC charger)

  • Mains adapter ACA 220-240/18V Ergo

    for ETSC 125, RTSC 400, DTSC 400 cordless sanders

  • Diamond disc DIA HARD-D80

    for RG 80, RGP 80

  • Diamond disc DIA ABRASIVE-D80

    for RG 80, RGP 80

  • Diamond disc DIA HARD-D130

    for RG 130 ECI, RG 130, RGP 130, AGP 125

  • Diamond disc DIA ABRASIVE-D130

    for RG 130 ECI, RG 130, RGP 130, AGP 125

  • Diamond disc DIA STONE-D130

    for RG 130 ECI, RG 130, RGP 130, AGP 125

  • Diamond disc DIA THERMO-D130

    for RG 130 ECI, RG 130, RGP 130, AGP 125

  • Diamond disc DIA PAINT-D130

    for RG 130 ECI, RG 130, RGP 130, AGP 125

  • Diamond disc DIA HARD-D130-ST

    for RG 130 ECI, RG 130, RGP 130, AGP 125

  • Diamond disc DIA ABRASIVE-D130-ST

    for RG 130 ECI, RG 130, RGP 130, AGP 125

  • Diamond disc DIA HARD-D150

    for RG 150, RGP 150

  • Diamond disc DIA ABRASIVE-D150

    for RG 150, RGP 150

  • Diamond disc DIA THERMO-D150

    for RG 150, RGP 150

  • Sanding pad set DIA HARD D44/35

    RGP 3

  • Sanding pad set DIA ABRASIV D44/35

    RGP 3

  • Machine/tool head SZ-RG 80

    for RG 80, RGP 80

  • Machine/tool head HW COARSE-RG 80

    for RG 80, RGP 80

  • Machine/tool head DIA HARD-RG 80

    for RG 80, RGP 80

  • Machine/tool head DIA ABRASIVE-RG 80

    for RG 80, RGP 80

  • Machine/tool head SZ-RG 150

    for RG 150, RGP 150

  • Machine/tool head DIA HARD-RG 150

    for RG 150, RGP 150

  • Machine/tool head DIA ABRASIVE-RG 150

    for RG 150, RGP 150

  • Machine/tool head DIA THERMO-RG 150

    for RG 150, RGP 150

  • Cutter wheel HW-FZ 12

    for RG 80, RGP 80

  • Cutter wheel HW-SZ 12

    for RG 80, RGP 80

  • Cutter wheel HW-SZ 35

    for RG 150, RGP 150

  • Guide table GT-RG 130

    for RG 130 ECI, RG 130, RGP 130

  • Floor guide BG-RG 150

    for RG 150, RGP 150

  • Brush ring BC-RG 130

    for RG 130 ECI, RG 130, RGP 130

  • Brush ring BC-RG 150

    for RG 150, RGP 150

  • Balancer BR-RG 150

    for RG 150, RGP 150

  • Wallpaper perforator TP 220