Plunge-cut saw blades

New saw blades. Perfect results.

 

  • Work up to twice as fast – with consistently perfect cutting quality. Thanks to reduced cutting width and new toothing shapes.
  • Low costs due to longer service life. Thanks to special geometry and high-quality carbide saw teeth.
  • You can always rely on a perfect cut. Completely smooth-running and splinter-free cutting edges.
  • Work even healthier. The reduced cutting width and thus less material chipping ensure lower dust levels.

    Performance features

    • Working progress

      Saw up to twice as fast – that saves time.

      +
      Sawing progress

    • Running metres per battery charge

      Saw longer with just one battery charge.

      +
      Running metre battery charge

    • Saw blades service life

      Significantly longer service life with consistent cutting quality.

      +
      Service life

    1. Test result depends on the material and condition

    2. Relative values, indexed to 100 and related to the Festool Z48/2.2 mm saw blade

    Sawing applications

    • Saw blades for plunge-cut saws – WOOD FINE CUT

      WOOD FINE CUT

      The fine-cut blade for clean and splinter-free cross cuts in solid wood, laminated or veneered sheet materials and acrylic glass.
    • Saw blades for plunge-cut saws – WOOD UNIVERSAL

      WOOD UNIVERSAL

      The all-rounder for working with all types of wood and wood materials, as well as building panels and soft plastics.
    • Saw blades for plunge-cut saws – WOOD RIP CUT

      WOOD RIP CUT

      For fast working with little effort, especially for rip cuts on solid wood. Suitable for hardwood and softwood.
    • Saw blades for plunge-cut saws – LAMINATE/HPL

      LAMINATE/HPL

      Ideal for laminate and melamine-resin-bonded panels (e.g. Trespa®).
    • Saw blades for plunge-cut saws – ALUMINIUM/PLASTICS

      ALUMINIUM/PLASTICS

      Highly suitable for aluminium sheets and profiles as well as fibre-reinforced and hard plastics.
    • Saw blades for plunge-cut saws – ABRASIVE MATERIALS

      ABRASIVE MATERIALS

      The problem solver for cement and gypsum-bonded particle boards and fibreboards.

    Tooth shapes

    Tooth shapes – cross-cut tooth

    Cross-cut tooth

    The teeth are slanted on the left and right and cut alternately. This reduces the load on the individual teeth. This causes the saw blade to run smoothly and have a longer service life. In addition, this toothing ensures ideal cutting quality.

    Tooth shapes – trapezoidal cross-cut tooth

    Trapezoidal cross-cut tooth

    In addition to the cross-cut teeth, a "trapezoidal tooth" is used. This relieves the cross-cut teeth and ensures a high and even running smoothness as well as a long service life. Excellent cutting quality is also achieved here.

    Tooth shapes – trapezoidal/flat tooth

    Trapezoidal/flat tooth

    Trapezoidal and flat teeth are arranged alternately. The trapezoidal tooth is responsible for sawing progress, while the flat tooth ensures a clean cutting edge. The robust toothing results in a longer saw blade service life.

    Tooth shapes – flat tooth with variable chamfer

    Flat tooth with variable chamfer

    The flat teeth are slanted on the left and right and cut alternately, thus relieving the individual teeth. This results in consistent quality with a longer service life.

    Tooth shapes – flat tooth

    Flat tooth

    The cutting edges of the teeth are straight. This makes the toothing robust. Each tooth cuts the same and is therefore used for hard materials such as steel and abrasive materials.

    Tool compatibility

    Product WOOD
    FINE CUT    		 WOOD
    UNIVERSAL    		 WOOD
    RIP CUT    		 LAMINATE/
    HPL    		 ALUMINIUM/
    PLASTICS    		 ABRASIVE
    MATERIALS
    Cutting width 1.8 mm 2.2 mm 1.8 mm 2.2 mm 1.8 mm 2.2 mm 1.8 mm 2.2 mm 1.8 mm 2.2 mm 1.8 mm 2.2 mm
    Item HW
    160 x 1.8 x 20
    WD42    		 HW
    160 x 2.2 x 20
    W48    		 HW
    160 x 1.8 x 20
    W28    		 HW
    160 x 2.2 x 20
    W28    		 HW
    160 x 1.8 x 20
    PW12    		 HW
    160 x 2.2 x 20
    PW12    		 HW
    160 x 1.8 x 20
    TF52    		 HW
    160 x 2.2 x 20
    TF48    		 HW
    160 x 1.8 x 20
    F/FA52    		 HW
    160 x 2.2 x 20
    TF48    		 DIA
    160 x 1.8 x 20
    F4    		 160 x 2 x 20 DIA4
    Product number 205553
    		 491952 205551 496302 205550 496301 205554 496308 205555 496306 205558 201910
    TS 55 F (from April 2021)
    		 x x x x x x
    TSC 55 K (from April 2021) x x x x x x
    HK 55
    		 x x x x x x
    HKC 55 x x x x x x
    TS 55 R (2012 – April 2021)
    		 x x x x x x
    TSC 55 (2014 – April 2021) x x x x x x

    Sawing overview

    FAQs

    Answers to frequently asked questions about the new saw blades.

    Can the saw blades with 1.8 mm cutting width also be used in conjunction with the HKC 55 and the HK 55?
    Yes, all 1.8 mm saw blades are also suitable for the HKC 55 and the HK 55. The only exception is the diamond saw blade for abrasive materials. This saw blade is only suitable for the TS 55 F and TSC 55 K.
    Can the saw blades with 1.8 mm cutting width from Festool be resharpened?
    Yes, our saw blades can be resharpened up to ten times as usual.
    Can the saw blades with 1.8 mm cutting width be used on the TS 55 R and TSC 55?
    No, because the guide wedge of the TS 55 R as well as the TSC 55 is wider (2.2 mm cutting width) than the cutting width of the new saw blades (1.8 mm cutting width).
    Can the saw blades with 2.2 mm cutting width be used on the TS 55 F and the TSC 55 K?
    Only saw blades with 1.8 mm cutting width may be used with the TS 55 F and the TSC 55 K.
    Can the TS 55 R and TSC 55 guide wedge be retrofitted so that the new saw blades (1.8 mm cutting width) can be used?
    That is not possible for approval-related reasons.