Screwdriver and drill bit set TID 18 HPC 4,0 I-Set T18

    Item number 577244

    Items included

      • TID 18 cordless impact driver
      • T18+3 cordless drills
      • 2x BP 18 Li 4.0 HPC-ASI battery pack
      • rapid charger TCL 6
      • FastFix keyless chuck 13 mm KC 13-1/2-K-FFP
      • belt clip
      • Systainer SYS3 M 237
    Show details
    Close

    Functions

    Two screwdrivers in one Systainer: Flexibility and robustness – a perfect combination.

    Super flexible for drilling and screwdriving or extremely powerful, robust and long-lasting. With the T 18 +3 cordless drill and the TID 18 cordless impact screwdriver, you are equipped for almost every drilling and screwdriving application. The T18+3 with completely electronic torque adjustment, CENTROTEC quick-change system, angle attachment, eccentric attachment and depth stop is super flexible and means that you can quickly change between drilling and screwdriving. Meanwhile, the TID 18 is a compact powerhouse that offers an impressive service life thanks to its extremely robust hammer mechanism. Moreover, the turning screw will take the full force of the TID 18 with its ¼" tool holder – with no strain at all on your wrist: This is thanks to the tangential hammer mechanism with no strength-sapping back torque. The two tools impress with their brushless and maintenance-free EC-TEC motors which, combined with the battery pack, ensure maximum endurance. The cordless drill and battery pack are completely covered with the Festool SERVICE, giving you peace of mind for your day-to-day work.

    • Robust: Long-lasting quality components, also fully covered thanks to the comprehensive support provided by Festool Service.
    • Maximum power: Thanks to the extremely powerful, brushless, and therefore long-lasting, EC-TEC motor
    • Ergonomic: compact design enables you to work accurately and for longer without becoming tired, even in hard to reach areas
    • Mobile: Stowed in Systainer³ products, the screwdrivers can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site
    • Flexible battery system: For applications with high power needs, the 4.0 Ah Li-HighPower Compact battery pack provides the ideal powerful, compact and lightweight solution. For even less weight, the 3.0 Ah Compact battery pack is an ideal option for light screw joints
    • The cordless drill and battery pack are fully covered by the comprehensive support provided by Festool Service
    • T18+3: Switch from screwdriving to drilling without changing the set torque Fully electronic torque setting and switch-off for precise screwdriving
    • T18+3: Clever attachments and CENTROTEC rapid tool-change system for all applications: Angle attachment, eccentric attachment and depth stop
    • T18+3: FastFix interface on the cordless drill for rapid change of attachments within seconds without tools
    • TID 18: Safe: Kickback-free tangential hammer mechanism protects your wrist
    • TID 18: Convenient: Tool-free 1/4" holder, integrated bit storage, optimum LED illumination of the work area, belt clip for attachment on both sides

    Product highlights

    • Power and flexibility. In one Systainer.

      The TID 18 cordless impact screwdriver boasts an extremely good performance and has three speed settings for material-specific work. Clever: The T-mode for self-driving screws detects the transition between sheet metal and wood and automatically adapts the speed. The T18+3 cordless drill's CENTROTEC quick-change system, angle attachment, eccentric attachment and depth stop mean that you can step up the pace when drilling and screwdriving. The practical switch save function remembers the torque you have set, even when changing between drilling and screwdriving.

    • Robust quality.

      With its extremely powerful brushless EC-TEC motor and robust components, the TID 18 and T18+3 are ready for unlimited, long-lasting use.

    • Guaranteed reliability.

      The cordless screwdriver and battery pack are of course completely covered with the comprehensive services of Festool SERVICE.

    Product details

    TID 18 HPC 4,0 I-Set T18

    • T18: Intelligent motor management

      The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.

    • TID: Convenient design

      Everything is to hand with integrated bit storage, powerful LED and belt clip for attachment on both sides.

    • TID: Made for mobility

      It comes in a Systainer³ and so can be integrated perfectly into the bott vehicle fixture for easy transport from the body shop to the building site.

    • TID: Universal battery system

      Compatible with Li-HighPower Compact, Compact and Standard batteries, as well as all chargers, for the perfect power-to-weight ratio for every application.

    • T18: Work comfortably

      The light T-design, the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.

    • T18: Ideal for tight spaces

      As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the T 18+3.

    • T18: CENTROTEC quick-change system

      Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.

    • T18: Optimum power performance

      Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.

    • TID: T-mode

      For controlled work with self-driving screws.

    • TID: Tangential hammer mechanism

      No back torque for screwdriving that protects your wrist.

    • TID: ¼ inch tool holder

      Quick and easy bit changes.

    • T18: Intelligent motor management

      The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.

    • TID: Convenient design

      Everything is to hand with integrated bit storage, powerful LED and belt clip for attachment on both sides.

    • TID: Made for mobility

      It comes in a Systainer³ and so can be integrated perfectly into the bott vehicle fixture for easy transport from the body shop to the building site.

    • TID: Universal battery system

      Compatible with Li-HighPower Compact, Compact and Standard batteries, as well as all chargers, for the perfect power-to-weight ratio for every application.

    • T18: Work comfortably

      The light T-design, the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.

    • T18: Ideal for tight spaces

      As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the T 18+3.

    • T18: CENTROTEC quick-change system

      Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.

    • T18: Optimum power performance

      Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.

    • TID: T-mode

      For controlled work with self-driving screws.

    • TID: Tangential hammer mechanism

      No back torque for screwdriving that protects your wrist.

    • TID: ¼ inch tool holder

      Quick and easy bit changes.

    Usage

    Main applications

    • Screwdriving work that protects your wrist, with no reverse torque
    • Furniture assembly and kitchen fitting
    • Installation of fittings, rear walls, strips
    • Installation of doors and windows
    • Screwdriving in wood, metal and plastic
    • Fences, pergolas, carports, canopies
    • Production of wooden substructures
    • Drilling and screwdriving in wood, metal and plastic

    Technical Data

    
    Technical data
    Battery voltage (rated voltage)
    18 V
    Product weight without accessories
    1.90 kg
    Transport weight incl. accessories
    7.10 kg
    Battery capacity
    4.00 Ah
    Drive type
    Battery
    Technology
    Bluetooth®
    Performance features

    • Electronic

      Speed control for adjusting to all types of materials.

    • Lithium-ion battery

      Fitted with high-performance lithium ion battery pack.

    • EC TEC II

      The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.

    Noise and vibration values
    Fastening: Total vibration average, Ah
    24.00 m/s²
    Fastening: Standards series EN
    62841
    Fastening: Uncertainty (noise) K
    3.00 dB
    Fastening: Uncertainty (vibration) K
    4.00 m/s²
    Fastening: A-weighted sound pressure level, LpA
    97.00 dB(A)
    Fastening: A-weighted sound power level, LWA
    108.00 dB(A)

    Downloads

    All
    All
    • All
    • Operating manual
    • Safety instruction
    • Declaration of conformity
    • Label
    • All
    • Operating manual
    • Safety instruction
    • Declaration of conformity
    • Label
    Op. Instruct.
    (PDF | 1MB)
    Security Information Battery Pack
    (ZIP | 1MB)
    Safety instruction
    (PDF | 532KB)
    Transport Document Battery Pack
    (ZIP | 1MB)
    Transport of Battery Pack
    (ZIP | 3MB)
    test summary UN 38.3 HPC
    (PDF | 372KB)
    Declaration of conformity
    (PDF | 47KB)
    Label
    (PDF | 206KB)

    Accessories

    You can view 8 of 13 possible accessory items here. You can view 4 of 13 possible accessory items here.

    Show all
    Show all

    Additional versions

    You might be also interested in this