Disk groove cutter HW D40x3,5

    for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200
    Item number 491058

    The groove depth can be determined via three different cutter spindles. Variant 1 without a ball bearing must be used with a parallel side fence, variant 2 with a 16 mm ball bearing and variant 3 with a 28 mm ball bearing.

    • The carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-up
    • Cutter replacement is done quickly and easily via a screw on the cutter spindle
    • carbide-tipped cutters
    • various routing depths can be realised by different cutter spindles

    Main applications

    • Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm
    • The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm
    
    Technical data
    D
    40.00 mm
    Dia.
    6.00 mm
    NL
    3.50 mm
    Safety instruction
    (PDF | 551KB)
    Safety instruction
    (PDF | 420KB)

    You can view 3 of 3 possible accessory items here. You can view 3 of 3 possible accessory items here.

    You might be also interested in this