Module edge router MFK 700 EQ/B-Plus

Item number 576241

Items included

- Ø 8 mm clamping collet
- open ended spanner, WAF 19
- plug it-power cable (4 m)
- Systainer SYS3 M 187

Show details

Close

Functions

The end of the perfect edge.

Optimised for routing plastic and veneered edges perfectly flush. The specially developed chip deflector optimises the dust extraction, ensures streak-free results thanks to the integrated ball bearing brake and acts as a guiding aid when flush trimming angled edges. This means that you are ready to make the perfect edge.

Edge router specially designed for flush trimming and rounding protruding edges
Chip deflector acts as a guide to flush trim 0–45° inclined edges
Good view of the workpiece - extraction directly from the table
Perfect working results with precision fine adjustment
Large support base ensures safe guidance
Unique ball bearing brake ensures clean working
with ball bearing brake and chip deflector

Product highlights

Achieve ideal results more quickly:

The ball bearing brake prevents damage, even to delicate edges. The routing depth can be adjusted quickly and precisely with the fine adjuster.
Convenient and safe:

The long router table support, with an extension for holding the edging overhang, ensures safe guidance – without tipping over.
Systems get it done:

Perfect in combination with the reversible blade ogee cutters that are designed for standard edge thicknesses. Or for routing workpieces with angled edges using the facing cutter.

Product details

MFK 700 EQ/B-Plus

Precise fine adjustment

The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.
Universal interface

By using the integrated interface, different router table modules can be used without the need for tools.
Flush trimming

The S8 HW MFK facing cutter can also be used to route edges flush, even for angled edges. The chip deflector is shaped so that it acts as a guiding aid, irrespective of the edge angle.
Flush routing and rounding

The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.

Cutter replacement in seconds

With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.
Clean and healthy work

The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.
Speed control adapted to the material

Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.
For quick device changeover

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Precise fine adjustment

The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.

Universal interface

By using the integrated interface, different router table modules can be used without the need for tools.
Flush trimming

The S8 HW MFK facing cutter can also be used to route edges flush, even for angled edges. The chip deflector is shaped so that it acts as a guiding aid, irrespective of the edge angle.
Flush routing and rounding

The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.
Cutter replacement in seconds

With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.
Clean and healthy work

The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.
Speed control adapted to the material

Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.
For quick device changeover

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Usage

Main applications

Edge router specially designed for flush trimming and rounding protruding edges
Unique ball bearing guide brake ensures perfect, streak-free working results
Possible to flush trim 0-45° inclined edges (depending on cutter)

Technical Data

Technical data

Power consumption

720 W

Idle engine speed

10 000 - 26 000 min⁻¹

Collet dia.

6 - 8 mm

Routing depth fine adjustment range

14.00 mm

Max. cutter diameter

32.00 mm

Dust extraction connection diameter

27 mm

Cable length

4.00 m

Product weight without accessories

2.30 kg

Transport weight incl. accessories

4.70 kg

Drive type

Mains

Performance features

Antistatic function

Mobile dust extractors and tools with the antistatic function to prevent static charge from accumulating when working.
CLEANTEC

Standard connection (27/36/50 mm) for dust extraction, protects the operator and the environment.
MMC digital electronics

Processor controlled “Multi Material Control” power electronics provide adjustable and constant speeds as well as temperature monitoring for work on all types of material.
FastFix

Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Plug it

Removable, replaceable mains cable with safety lock for quick conversion.