Module edge router MFK 700 EQ-Set

Item number 578059

Items included and different models

{0} of {1} displayed

MFK 700 EQ-Plus

MFK 700 EQ-Set

This machine

MFK 700 EQ-Set

Items included

1.5° router table 1x

contact pad 1x

extraction hood 1x

Ø 8 mm clamping collet 1x

open ended spanner, WAF 19 1x

parallel side fence with fine adjuster SA-OF 1010/MFK 1x

plug it-power cable (4 m) 1x

screwdriver, WAF 3 1x

Systainer SYS3 M 187 1x
Comparable product

MFK 700 EQ-Plus

Items included

1.5° router table 1x

contact pad 1x

extraction hood 1x

Ø 8 mm clamping collet 1x

open ended spanner, WAF 19 1x

parallel side fence with fine adjuster SA-OF 1010/MFK 1x

plug it-power cable (4 m) 1x

screwdriver, WAF 3 1x

Systainer SYS3 M 187 1x

Show details

Show details

Close

Functions

Versatile when trimming edges.

Convenient conversion. The modular design makes the MFK 700 a cost-effective all-rounder: Only the router table, and not the entire router, needs to be changed – and it is ideally equipped for all tasks involved in corner and edge trimming. Simply set down the right table and you can immediately route veneers or grooves, round edges, create profiles and much more.

Wider application spectrum due to interchangeable router tables
Efficient dust extraction integrated directly on the router base
130 mm table support surface for accurate routing results
Electronic speed adjustment switch for perfect adaptation to the working material
Motor temperature monitor for a long service life

Product highlights

Achieve ideal results more quickly:

The universal interface enables various router table modules to be used for a range of different applications.
Convenient and safe:

The long router table support with auxiliary handle guarantees safe guidance – without tipping over.
Systems get it done:

Can be expanded in a number of ways with perfectly matched routers, router tables, collets, parallel side fence and more.

Product details

MFK 700 EQ-Set

Precise fine adjustment

The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.
Universal interface

By using the integrated interface, different router table modules can be used without the need for tools.
Moving contact pad

The MFK 700 has a moving contact pad with an external ball bearing, ensuring streak-free routing results (included in the scope of delivery of the Set versions or available separately).
Surface protection

The bench of the MFK 700 is inclined by 1.5° to protect the surface from damage. The slight inclination of the router tool prevents you from routing into the material surface (included in the scope of delivery for the Set versions or available separately).

Flush routing and rounding

The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.
Side stop with fine setting

Thanks to the central clamp and the tool-free adjustable guidance jaws, the parallel side fence is ready for use in an instant. The fine adjuster, precise to the millimetre, offers maximum precision when routing.
Cutter replacement in seconds

With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.
Clean and healthy work

The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.
Flexible motor design

The right motor arrangement for every application: The motor can be installed horizontally or vertically on the router table.
Speed control adapted to the material

Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.
For quick device changeover

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Precise fine adjustment

The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.

Universal interface

By using the integrated interface, different router table modules can be used without the need for tools.
Moving contact pad

The MFK 700 has a moving contact pad with an external ball bearing, ensuring streak-free routing results (included in the scope of delivery of the Set versions or available separately).
Surface protection

The bench of the MFK 700 is inclined by 1.5° to protect the surface from damage. The slight inclination of the router tool prevents you from routing into the material surface (included in the scope of delivery for the Set versions or available separately).
Flush routing and rounding

The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.
Side stop with fine setting

Thanks to the central clamp and the tool-free adjustable guidance jaws, the parallel side fence is ready for use in an instant. The fine adjuster, precise to the millimetre, offers maximum precision when routing.
Cutter replacement in seconds

With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.
Clean and healthy work

The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.
Flexible motor design

The right motor arrangement for every application: The motor can be installed horizontally or vertically on the router table.
Speed control adapted to the material

Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.
For quick device changeover

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Usage

Main applications

Routing solid wood, acrylic and PVC edge veneer
Chamfering, rounding and profiling edges
Grooving with side stop

Technical Data

Technical data

Power consumption

720 W

Idle engine speed

10 000 - 26 000 min⁻¹

Collet dia.

6 - 8 mm

Routing depth fine adjustment range

14.00 mm

Max. cutter diameter

32.00 mm

Dust extraction connection diameter

27 mm

Cable length

4.00 m

Product weight without accessories

2.30 kg

Transport weight incl. accessories

6.00 kg

Drive type

Mains

Performance features

Antistatic function

Mobile dust extractors and tools with the antistatic function to prevent static charge from accumulating when working.
MMC Multi Material Control electronics

“Multi Material Control” power electronics with constant adjustable speed and temperature monitor for work on all types of material.
FastFix

Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Plug it

Removable, replaceable mains cable with safety lock for quick conversion.
CLEANTEC

Standard connection (27/36/50 mm) for dust extraction, protects the operator and the environment.

Noise and vibration values

Routing: Uncertainty (vibration) K

1.50 m/s²

Routing: Uncertainty (noise) K

1.50 dB

Routing: Total vibration average, Ah

2.50 m/s²

Routing: Standards series EN

60745-2-17

Routing: A-weighted sound pressure level, LpA

81.00 dB(A)

Routing: A-weighted sound power level, LWA

92.00 dB(A)

Downloads

Accessories

You can view 8 of 23 possible accessory items here. You can view 4 of 23 possible accessory items here.

Parallel side fence SA-OF 1010/MFK

for OF 900, OF 1000, OF 1010, OF 1010 R, MFK 700
Router table FT 0°

for MFK/OFK 700
Router table FT-MFK 700 1,5° Set

for MFK/OFK 700
plug it-cable H05 RN-F-4
Roundover cutter HW S8 D16,7/R2 KL

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200
Roundover cutter HW S8 D19,1/R3 KL

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200
Roundover cutter HW S8 D20,7/R4 KL

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200
Roundover cutter HW S8 D22,7/R5 KL

for OF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200

Module edge router MFK 700 EQ-Set

Items included and different models

Functions

Versatile when trimming edges.

Product highlights

Achieve ideal results more quickly:

Convenient and safe:

Systems get it done:

Product details

Precise fine adjustment

Universal interface

Moving contact pad

Surface protection

Flush routing and rounding

Side stop with fine setting

Cutter replacement in seconds

Clean and healthy work

Flexible motor design

Speed control adapted to the material

For quick device changeover

Precise fine adjustment

Universal interface

Moving contact pad

Surface protection

Flush routing and rounding

Side stop with fine setting

Cutter replacement in seconds

Clean and healthy work

Flexible motor design

Speed control adapted to the material

For quick device changeover

Usage

Main applications

Technical Data

Antistatic function

MMC Multi Material Control electronics

FastFix

Plug it

CLEANTEC

Downloads

Accessories

Additional versions

You might be also interested in this